Injector differences between OBD1 and OBD2 - do i care?

Discussion in 'General Motoring' started by rmiller, Feb 2, 2008.

  1. rmiller

    rmiller Guest

    Hi again, another issue hit me today and I read somewhere that the
    injectors are different between the F22B1 (97 accord donot motor) and
    the H23A1 (95 Prelude that was int he car).
    I used the original resister pack from the Prelude (non-VTEC) and do I
    have to worry about Injector size, impeadance, resister packs ect...?

    thanx in advance.

    RJ
     
    rmiller, Feb 2, 2008
    #1
  2. rmiller

    jim beam Guest

    yes, you need to worry - the impedance is different. just use the
    injectors that came with the ecu you're using. don't worry about flow
    rates - unless you're a high blown turbo, stock honda injectors will
    flood anything you put them in.
     
    jim beam, Feb 2, 2008
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Differences between Honda groups? Does anyone know them?

  2. Is there a difference between '88 and '89 CRX Shocks and springs?

  3. obd1 not obd in 99 civic dx (turbo)

  4. Differences between a 2010 Civic and Elantra

  5. Concerto torque converter lock and unlock between 60 and 80 mph

  6. Hitch Differences for 1991 Accord Wagon and Sedan?

  7. differences between 06 accord and civic?

  8. OBD2 check engine code readers and erasers

Loading...