Installed new Koni's....Now what???

Discussion in 'General Motoring' started by Blah....@bal, Sep 20, 2005.

  1. Blah....@bal

    Blah....@bal Guest

    Okay, I just spent about 6.5-7 hours installing new Koni's in my car
    with the stock springs. The reason is because I don't want the car any
    lower than it already is. After stripping the pinch bolts and having
    to get my local Honda guy to re-tap them, it's finally all done.
    However, three of the four springs SQUEAK like crazy. What did I do
    wrong?? Do I need to re-do this whole job, or can I spray oil
    somewhere?? Thanks!!

    Nate
     
    Blah....@bal, Sep 20, 2005
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Installed third party audio... now my engine light is on.?

  2. Has anyone here self-installed new disc-brake pads on theirOdyssey?

  3. 2002 Honda Struts - What should I do now?

  4. Got the codes - 96 Accord EXR - now what?

  5. 98-02 Accord with Eibach ProKit/Koni Yellow Struts

  6. 2002 Civic Replaced ELD for AC-now what?

  7. Ground clearance question/ aftermarket suspension/2001 civic/KONI

Loading...