Last Foot or So of Tailpipe Rusted

Discussion in 'General Motoring' started by Elle, Mar 21, 2007.

  1. Elle

    Elle Guest

    .... and could break off soon.

    Best quick fix, short of replacing the whole muffler
    assembly?
     
    Elle, Mar 21, 2007
    #1
  2. Elle

    Grumpy AuContraire Guest


    Depending on pipe diameter, flex line can be bought at your FLAPS.

    JT
     
    Grumpy AuContraire, Mar 21, 2007
    #2
  3. Elle

    Grumpy AuContraire Guest


    Depending on pipe diameter, flex line can be bought at your FLAPS.

    JT
     
    Grumpy AuContraire, Mar 21, 2007
    #3
  4. Elle

    ssateren Guest

    Cut it off where it's rusty. Buy some pipe that's the same diameter
    [ID & OD sizes are different, so if an ID pipe doesn't fit buy the OD
    pipe. The diference is measuring inner diameter & outer diameter].

    Use an exhaust clamp & clamp the new pipe onto the old one.

    Should be fine :]
     
    ssateren, Mar 22, 2007
    #4
  5. Elle

    ssateren Guest

    Cut it off where it's rusty. Buy some pipe that's the same diameter
    [ID & OD sizes are different, so if an ID pipe doesn't fit buy the OD
    pipe. The diference is measuring inner diameter & outer diameter].

    Use an exhaust clamp & clamp the new pipe onto the old one.

    Should be fine :]
     
    ssateren, Mar 22, 2007
    #5
  6. Elle

    Elle Guest

    I take it FLAPS = Favorite Local Auto Parts Store or
    similar?

    Thanks JT (Grumpy) and Ssateren!
     
    Elle, Mar 22, 2007
    #6
  7. Elle

    Elle Guest

    I take it FLAPS = Favorite Local Auto Parts Store or
    similar?

    Thanks JT (Grumpy) and Ssateren!
     
    Elle, Mar 22, 2007
    #7
  8. Elle

    Grumpy AuContraire Guest



    Yeppers...

    JT
     
    Grumpy AuContraire, Mar 22, 2007
    #8
  9. Elle

    Grumpy AuContraire Guest



    Yeppers...

    JT
     
    Grumpy AuContraire, Mar 22, 2007
    #9
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. sooty tailpipe (civic 88)

  2. How to break free rusted brakes?

  3. 1993 Honda Civic clutch foot pedal has little pressor

  4. tailpipe wont come off 91 civic -- tuffy's gouging

  5. what is the correct foot pounds for 2001 Honda Prelude Lug Nuts?

  6. +200 foot pounds of torque on my lug nuts?! Bad?

  7. Door Sills and Aluminum Pedal & Foot Rest

  8. Honda Civic 2006 power to foot well lights

Loading...