Loose Bumper

Discussion in 'General Motoring' started by TrashMasher, Sep 29, 2006.

  1. TrashMasher

    TrashMasher Guest

    Hello,

    I've got a problem that I am sure is minor and simplistic to the
    majority but has continued to bewilder me for some time.

    About a year ago, I got into a light fender bender with my 2000 Honda
    Civic EX. There was little damage to either car, but my Honda did
    receive the brunt of the impact and damage.

    Now, my problem is that a screw holding the front right side of the
    bumper to the frame of the car has come off. The impact seems to have
    broken the plastic housing the screw tightens into and as a result, the
    bumper hangs down about 1/4 of an inch below the right headlight.

    I've tried to fix this problem in a number of ways, from using a zip
    cord to superglue, none sucessful. I know there is some way that can
    be corrected, any thoughts?

    thanks

    LFM
     
    TrashMasher, Sep 29, 2006
    #1
  2. -------------------------------------
    Whatever kind of Honda you may have (you didn't say) might be listed in
    www.slhondaparts.com . Look at the parts list and get the plastic anchor
    and a screw from the dealer or a body shop.

    Voila!

    'Curly'
     
    'Curly Q. Links', Sep 30, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.