my clutch is slipping wen the car get worm

Discussion in 'General Motoring' started by Kraftyone, Apr 6, 2007.

  1. Kraftyone

    Kraftyone Guest

    I have replaced the clutch disc pressure plate release bearing and
    cleaned the fly wheel and the car drives fine. But after a 30 min
    driving wen the car is wormed up the clutch slips and its hard to get
    the tranny into first gear Please help im tottaly lost :x
     
    Kraftyone, Apr 6, 2007
    #1
  2. Kraftyone

    motsco_ Guest

    ------------------------------------

    OK, it's a _car_ .

    Dates, mileages, age, model, country ?

    'Curly'
     
    motsco_, Apr 6, 2007
    #2
  3. Kraftyone

    Linuxiac Guest

    Without any info at all, I do wonder if it has a hydralic actuator, and
    old brake fluid absorbs water, which can boil and expand, after about 30
    minutes of running, and partially release the clutch, even if no foot is
    on the pedal!

    Solution for that is to drain, replace, bleed fluid in that small
    system. Also check that the free play is adjusted properly, so the
    pedal has the half to one inch free play at the pedal.
     
    Linuxiac, Apr 9, 2007
    #3
  4. Psychic Wednesday is a few days off. What model and year, how many miles on
    the car?

    Mike
     
    Michael Pardee, Apr 9, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.