New tires & rims pull to the right

Discussion in 'General Motoring' started by JM, Dec 2, 2007.

  1. JM

    Matt Ion Guest

    Actually, just noticed today that the Michelin X-ICE snow tires on my
    MPV are unidirectional as well...

    http://www.tirerack.com/tires/tires.jsp?tireMake=Michelin&tireModel=X-Ice
     
    Matt Ion, Dec 5, 2007
    #21
  2. JM

    Jim Yanik Guest

    Again,not much "directionality".(a deep Vee tread)
    (compared to common sport directional tire treads)

    For a snow tire,you really can't go "directional" like regular sport
    tires(like Yoko ES100),you'd lose the snow traction ability.
     
    Jim Yanik, Dec 6, 2007
    #22
  3. JM

    Matt Ion Guest

    I didn't realize there could be varying degrees of "directionality"...
    is it possible to be "only a little bit directional"? Is that like
    being "slightly pregnant"?
     
    Matt Ion, Dec 6, 2007
    #23
  4. JM

    Jim Yanik Guest

    by that I mean the degree of slant of the grooving.If you examine the ES100
    tread,the "directional" grooves wrap much more around the tire in the plane
    of the tire,a "deeper Vee".
    your tire is much more "cross tread" than a typical directional tread tire.
    Thus you get more tire noise on dry pavement.

    I doubt you'd see much difference if your tire was mounted the "wrong way".
     
    Jim Yanik, Dec 6, 2007
    #24
  5. JM

    Matt Ion Guest

    I'm looking at assorted different pictures of various directional tires.
    Few of their tread patterns are as "exaggerated" as those on the ES100s.

    Fact is, the manufacturer considers the design "directional" and the
    tires are accordingly marked with directional arrows. Thus they ARE, in
    fact, directional tires, whether or not Jim Yanik considers them to be so.
     
    Matt Ion, Dec 7, 2007
    #25
  6. JM

    John Horner Guest


    Maybe the shop used poor lifting practices and bend a suspension arm
    slightly.
     
    John Horner, Dec 9, 2007
    #26
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.