oil orifice 15b7 1994?

Discussion in 'General Motoring' started by Rocky, Jun 26, 2005.

  1. Rocky

    Rocky Guest

    I am replacing the head gasket 1994 1.5L civic lx - shop manual says clean
    oil orifice located near intake side of block when looking from above - how
    does this little part get removed? supposed to be an o-ring under it too.
     
    Rocky, Jun 26, 2005
    #1
  2. Rocky

    Eric Guest

    If I remember correctly, the hole is threaded. Find a small metric screw
    that easily threads into it and pull it out. Sorry, I don't remember the
    exact thread pitch. You should also replace the o-ring before you put it
    back into the block.

    Eric
     
    Eric, Jun 26, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. my 2002 accord had no washer on the oil pan when I changed the oil...

  2. Oil change done with wrong grade oil - damage?

  3. Worried: 03 Acura CLS 60k oil change and transmission oil/filter change

  4. Oil cap left off after oil change

  5. Honda Oil Filter Vs. Fram Oil Filter?

  6. 1986 Accord Exi - oil leak , oil filter mount leak , burning smell from oil leaking onto exhaust

  7. R12 to R134 Retrofit, where is the orifice?

  8. Proper viscosity oil in 1994 Civic DX

Loading...