http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=8008906498&sspagename=STRK%3AMESE%3AIT used Airesearch (Garrett) T3 turbo w/ water cooled bearing section 50 trim ..42 a/r compressor ..63 a/r turbine (measures about 2.1" in diameter) 5 bolt exhaust flange with internal wastegate port welded shut. Would need to run a separate wastegate or possibly machine the housing and install parts needed for internal wastegate. This turbo is probably best for parts. The compressor is a 50 trim and looks to be good for smaller engines like 1.6l at boost 10 psi, but that is just my opion (looking at the compressor map and calculating air volume at 6000 rpm to be about 21 lb/min).
