PCV Valve, 86 Accord

Discussion in 'Accord' started by llchadwell, Jun 21, 2005.

  1. llchadwell

    llchadwell Guest

    I need to replace the PVC valve on my 86 Accord. It carburated. I have
    no problem getting to the top hose, but how do you get the valve out of
    whatever it is mounted in underneath, and how do you get to it?
    I will appreciate your help. Thank you very much.
     
    llchadwell, Jun 21, 2005
    #1
  2. llchadwell

    Eric Guest

    This diagram should help http://tinyurl.com/5anyy. The PCV is part #18.

    If I remember correctly, the hose that's labeled as part #6 actually
    performs double duty as the PCV valve grommet. If the top part of the hose
    is dried out preventing you from removing the PCV valve, then you might to
    try spraying a little silicone lubricant on it.

    Eric
     
    Eric, Jun 22, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Honda Accord 1987 - replacing PCV valve grommet

  2. Honda Accord 1987 - PCV valve grommet

  3. PCV Valve replacement....

  4. where is PCV valve on 98 civic sedan

  5. PCV valve's a bitch

  6. PCV Valve on 99 Honda Accord and Hard-to-press Gas Padal

  7. '88 Accord PCV valve

  8. 2008-2010 Honda Accord PCV Valve Replacement Guide (2.4L I4)

Loading...