radio codes

I had some service work done one my 92 Accord the other day and today
when I turned on the radio the word "code" showed in the display. I
searched aound and found the plastic card that came with the car and
found the code numbers. Bud what is the procedure to enter these numbers
into the radio?

 

I don't have the procedure for your car but if you have a users manual it is
in it...

 

press the preset buttons numbered as per the code. code "12345" is
entered as preset 1, preset 2, etc.

 

-------------------------------

It's in your glove box, or here, in the chapter about the stereo:

https://techinfo.honda.com/rjanisis/RJAAI001_OMANUAL.asp

'Curly'

 

Thanks for the reply. I found the plastic card with the code numbers on
it and punched them in , but still the radio doesnt come on. the display
still says "code". Someone suggested I disconnect the battery lead for
about thirty seconds, reconnect then try the inputing the numbers again.
What do you think?

 

it should reset itself after a few minutes anyway, but if you want to
disconnect, pull the fuse - the one under the hood.

 

-------------------------------

The same people who built the car wrote the Owner's Manual. All this
stuff is in the manual.

https://techinfo.honda.com/rjanisis/RJAAI001_OMANUAL.asp

'Curly'