Radio Not working After Pulling out Alarm

Discussion in 'General Motoring' started by Red Cloud, Oct 10, 2006.

  1. Red Cloud

    Red Cloud Guest

    After I pulled out alarm, the radio is not working perfectly. The
    Radio is not always turn on.
    I checked the voltage reading on the 12volts supply to the radio
    headunit. The reading was 1.2 volts when the radio not turning on. I
    found out that if I turn the key Postion II and wait for whiles
    before I turn the engine, the radio is always on. If I turn the engine
    right away after I put the key,
    the radio will not always turn on. i never had this experience before I
    pulled out the alarm. I know
    that this has to do with alarm electrical connection but I don't know
    where to look for..
     
    Red Cloud, Oct 10, 2006
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Voice command for radio and AC not working on 03 w/NAVI

  2. front end pulling to one side when breaking

  3. fan working after keys out

  4. Gauges, rear defroster no longer working after radio stolen from '97 Accord

  5. 93 Accord Cruise Control... Pulling my hair out

  6. Speedometer still not working after replacing VSS - Now what?

  7. Radio Light Not working 2004 Honda Accord EXL

  8. Honda Civic Speedometer not working after replacing VSS

Loading...