Removing EGR valve 91 Accord

Discussion in 'Accord' started by nntpposting, Oct 29, 2007.

  1. nntpposting

    nntpposting Guest

    Folks,
    I have a 91 Honda Accord. I am trying to replace the EGR valve and I
    notice there are two nuts that need to be removed. Unfortunately the
    nuts are on so tight I cannot remove them as it is hard to get the
    wrench in there. Is there anyone who has done this before and can tell
    me how to get these two nuts out easily. Also what size sockets should
    I be using. Thanks.
     
    nntpposting, Oct 29, 2007
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 1996 Honda Accord LX Could a stuck EGR valve cause contaminates in the engine?

  2. Cleaning EGR valve? -2001 Accord 4 cyl

  3. 2000 honda accord v6 ex egr valve

  4. accord egr valve

  5. '91 Accord - DTC 12 EGR valve - My Experience.

  6. 2000 Honda Accord EGR valve

  7. Accord, 1998, 4 cyl. EGR valve

  8. 1991 Accord EX EGR valve

Loading...