Removing Engine

Discussion in 'General Motoring' started by Ludedude94, Apr 13, 2006.

  1. Ludedude94

    Ludedude94 Guest

    I have a 1994 honda prelude and i am in the prosses of taking the motor out and i am stuck i have alredy detached all the parts from the block itself and i am trying to pull it out but when ever i begin to pull the block it always gets stuck on the transsmision now i have tried to drop it striaght down but with knoe luck do you have any suggestions to make my life allitle easier
     
    Ludedude94, Apr 13, 2006
    #1
  2. Ludedude94

    Eric Guest

    Have you pulled both axles? In addition, are you using a tilt bar? You can
    see several examples here http://tinyurl.com/p9s2s. While I haven't pulled
    a motor on a '94 'Lude, other Honda motors I've pulled require you to use a
    tilt bar to angle the engine rather steeply before it will come out.

    Eric
     
    Eric, Apr 15, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Removing Crankshaft bolt

  2. 98 Accord - Removing the factory fitted stereo

  3. Removing crankshaft pulley?

  4. Removing factory stereo 93 civic lx

  5. Removing 03 Civic Si Door Panels

  6. Removing Emblems

  7. removing altenator for accord1

  8. having difficulty removing engine mount bolt

Loading...