Removing Timing Drive Pulley, 93 Civic

Discussion in 'Civic' started by davidkatzen, Aug 27, 2006.

  1. davidkatzen

    davidkatzen Guest

    Hi all:

    I am on my way to replace the crank oil seal in my 93 Civic, but have
    hit a snag. I can't get the timing belt drive pulley off. This pulley
    sits behind the large crankshaft pulley. Does anyone have any tricks to

    removing it? I've tried prying on the plate that sits behind it, but
    that doesn't work. Should it be this hard?


    Thanks.
     
    davidkatzen, Aug 27, 2006
    #1
  2. davidkatzen

    Elle Guest

    I think you mean the timing belt sprocket.

    Tap it a little with a brass mallet or any other material
    softer than steel. Worst case, you can purchase a puller
    from Autozone or Pep Boys that should work fine.
     
    Elle, Aug 27, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Removing crankshaft pulley?

  2. Looking for final drive gears from a honda front wheel drive transmission

  3. crank pulley (harmmonic balancer) 87 civic

  4. Removing crank pulley

  5. Does the CRV (1999) have a tensioner/idler pulley on the timing belt?

  6. 1995 Honda Passport - "Power Drive" vs. "Winter Drive"

  7. honda timing belt pulley bolt

  8. Removing Timing Drive Pulley, 93 Civic

Loading...