replace high beam on a 92 accord?

Discussion in 'Accord' started by Jim Eales, Sep 20, 2005.

  1. Jim Eales

    Jim Eales Guest

    Info on how to do it would be appreciated.

    Jim Eales
     
    Jim Eales, Sep 20, 2005
    #1
  2. If the same as the '93:

    1. Disconnect the 2-pin connector from the bulb. If on the right side,
    remove battery and coolant reservoir first. The connector appears to pull
    off downward, with a depress-tab latch.

    2. Turn the retaining ring CCW, then remove the bulb.

    If you have to replace the entire unit, there is more.

    Remember to clean the new bulb with alcohol before installing if you touch
    it with your fingers.

    (from the Helm manual for the '93 Accord)

    Mike
     
    Michael Pardee, Sep 21, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.