response to my oil light

Discussion in 'General Motoring' started by catbrim, Dec 27, 2005.

  1. catbrim

    catbrim Guest

    Remco, Im not that smart about cars, when I do change the sending unit
    switch, that is when I look at the oil light?because it takes a while for
    it to start flickering on, and off ,it goes out when I give it gas, is
    there a way to check it a home in park?
    If it is my idle, how? to check and fix the idle . thanks.
     
    catbrim, Dec 27, 2005
    #1
  2. catbrim

    Burt Guest

    Make sure you reply to your original thread http://tinyurl.com/8y6xk
    in the future.
     
    Burt, Dec 28, 2005
    #2
  3. catbrim

    Burt S. Guest

    What the heck. Do what ever you want this forum isn't moderated.

    Here's what I've done. I took the oil pan off (hard to do, had to
    remove the exhaust) and removed the Oil Pump screen. I soaked
    the screen in gasoline and got a small tooth brush inside to get the
    oil residue and other gunk off the screen. Put it all back together,
    put a thicker oil in and the light went out and all is back to normal.

    Here's a further check list.

    *Sender good? Either replace it or check the pressure.
    *Pressure good? Either have a pro check it out.
    *Sludge buildup on the pickup screen?
    *Oil relief valve good?
    *Oil pump good?
    *Bearing wear? As engines wear, bearing clearances grow and reduce
    oil pressure but in a '92 that usually shouldn't be the problem.
    *Filter OEM? this helps in case the pressure intermittently drops.
     
    Burt S., Dec 28, 2005
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.