Screws on my 2002 Civic air box stripped out.

Discussion in 'Civic' started by Rob, May 29, 2005.

  1. Rob

    Rob Guest

    I just got a 2002 used Civic and was checking the air filter. Looks like
    about three of the plastic screw holders are stripped out on the top air
    box. Is this a common problem with Civic's? Mine was a used certified Civic
    from a Honda dealer so should have been only worked on by Honda workers so
    is it possible that Honda would replace this broken part. Should I just get
    one of the after market type cold air intake systems. Thanks for any help.
     
    Rob, May 29, 2005
    #1
  2. Rob

    Shawn Taylor Guest

    no its not a problem with civics, if you get the right size screw driver
    they shouldnt strip out, if your going for performance or plan on doing some
    performance upgrades then get a cold air intake.
     
    Shawn Taylor, May 29, 2005
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. front rotor screws Odyssey 2002

  2. Swapping out brake bleeder screws

  3. 2003 Pilot air filter box... I stripped the bolts... why are therebolts anyway?

  4. 2002 Civic LX-Relays below the glove box hot, AC works only 50% of the time

  5. 2002 Civic LX-Relays below the glove box hot, AC works only 50% of the time

  6. What are the two relays below the glove box? 2002 Civic LX

  7. would a gear box out of a 95 civic SOHC fot a 97 civic coupe SOHC?

  8. 2002 Civic air box screws

Loading...