Slop in Gearshift

Discussion in 'General Motoring' started by Big Brother, Jul 22, 2008.

  1. Big Brother

    Big Brother Guest

    98 Civic LX w/ 5 speed manual trans..121,000 miles

    Car shifts fine through all gears...No shifting problems whatsoever..
    but there is a awful lot of "slop" with the gearshift when in any gear..

    Example..I can move the gearshift lever probably a good 4-6 inches from
    left to right of center while in any gear..

    Any thoughs..Maybe some kind of bushing worn ?

    Thanks..

    Rich
     
    Big Brother, Jul 22, 2008
    #1
  2. Big Brother

    jim beam Guest

    maybe. you need to get underneath and check.
     
    jim beam, Jul 22, 2008
    #2
  3. Big Brother

    jim beam Guest

    maybe. you need to get underneath and check.
     
    jim beam, Jul 22, 2008
    #3
  4. Big Brother

    motsco_ Guest

    =======================

    Parts diagrams are at www.slhondaparts.com

    Have you done a drain-n-fill of the Honda MTF lately? The newer
    formulation is apparently nicer in a couple respects.

    'Curly'
     
    motsco_, Jul 22, 2008
    #4
  5. Big Brother

    motsco_ Guest

    =======================

    Parts diagrams are at www.slhondaparts.com

    Have you done a drain-n-fill of the Honda MTF lately? The newer
    formulation is apparently nicer in a couple respects.

    'Curly'
     
    motsco_, Jul 22, 2008
    #5
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads
Loading...