Squeaky Brakes?

Discussion in 'General Motoring' started by Guest, Dec 4, 2006.

  1. Guest

    Guest Guest

    Hello,

    I have a 2003 CR-V. It has 56,000 KMS on it. The brakes are starting to
    squeak. Is this Normal? Moreover, what moron Honda engineer designed the
    brake fluid cap? I don't know how to tighten it? Help!
     
    Guest, Dec 4, 2006
    #1
  2. Guest

    Brian Smith Guest

    You call the designer a moron and YOU can't tighten the cap? LOL!
     
    Brian Smith, Dec 4, 2006
    #2
  3. Guest

    Tegger Guest


    Not normal. Can be caused by aftermarket pads, rust, dust, OR! pads worn
    down to their squeal tabs! Time to get them looked at.



    Turn counter-clockwise about 1/8 turn to remove. Might have to press down a
    bit while turning. To tighten, turn clockwise until it stops.

    There should be an arrow on the cap showing which way faces forward when
    locked in place. If you don't have that arrow pointing the right way, the
    lock tabs won't engage.
     
    Tegger, Dec 4, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.