Status Indicator Diagnostics/Cold start Valve

Discussion in 'General Motoring' started by John Lutz, Dec 6, 2003.

  1. John Lutz

    John Lutz Guest

    Status Indicator Diagnostics/Cold start Valve
    If the status diagnostic engine light stays on without blinking what
    does it mean? does it mean anything?

    Also, what if the symtoms of a Honda Accord EX 1993 are similar
    to that of a faulty solder joint on a Main relay but the Main Relay
    looks ok?
    For example the car initally stalls on ignition or keeps
    turning over.. but if the car is put into neutral with a little
    gas the likely hood of starting increases greatly.
    Is there a cold start valve on this model?

    Regards,
    John
     
    John Lutz, Dec 6, 2003
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 92 Prelude: Idle speed at Cold Start

  2. '91 Accord - loud squeaky noise on cold start

  3. Honda Accord EX 1993 Cold Start Valve

  4. Diagnostics menu in CR-V's navigation system

  5. left indicator lamp flashing faster than right indicator

  6. Where is the diagnostics port?

  7. lockup solenoid diagnostics

  8. Experience with OBD-II (on-board diagnostics scanner)

Loading...