Three Questions..

I own a 95, integra.

1/. I need to do my brakes on my car, I've seen my buddy do his brakes and
it looked like a snap, he had a ford pick up, I'm wondering.. since I have
to replace the pads and rotors on my brakes, do I have to worry about
alignment of the caliper or anything or will this be relatively as simple as
throwing in the rotors and pads..

2/. I have a wire that has come loose in the dash somewhere and it's
vibrating against something and dash. How hard is it to remove the dash to
get access to this? also the lights are out in the speedometer area, so I'd
replace that while I'm at it.

3/. the antena motor has disconnected from the actual antena. So the motor
runs when I turn the car on and off, but the antena does not move. How hard
is this to fix? and what do I need to do?

thanks,

Eric

 

click on www.tegger.com for a good FAQ page
there are a least two very good pages on breaks,
and lots of other interesting stuff. If that URL
does not work for you just do a Google search for
tegger.com. ( I have had some trouble sending URLs
in this newsgroup but I think it is fixed)
Ernie

 

This page may help.
http://tegger.com/hondafaq/rustybrakes/brakes1.html

If you live in a warm region, this will do:
http://www.g2ic.com/tegtips/brakesus/5.html

Your toothed cable is broken. I should add this to the FAQ.

Have a browse here:
http://tinyurl.com/59try