thumping noise during turns - not cv joint

Discussion in 'General Motoring' started by cox news, Apr 1, 2005.

  1. cox news

    cox news Guest

    I've got a 96 Accord that I've been fixing up for a friend that has a odd
    thumping noise during left turns. I figured it was CV joint related since
    both were blown on the outer boots, but the nooise hasnt changed at all. It
    developed shortly after replacing the lowering springs that came on the car
    with the orginal stockers. Visually I cant see anything wrong except for a
    strut bar bushing thats cracked on the left side and a cracked front engine
    mount. Neither are severe enough to be causing this noise (I think??). The
    noise seems to occur on 90 deg left turns only while the wheel is
    straightening back out. Rarely does it occur while turning the wheel left.
    Noise isnt speed dependent and just sounds like a metal on metal clunk
    coming from the engine compartment. I've gone over all the suspension and
    all the components are tight and in good shape sans the sway bar bushing.
    Any thoughts??

    thanks!!

    jeff
     
    cox news, Apr 1, 2005
    #1
  2. cox news

    gansen Guest

    Hi Jeff,

    Please put enough grease on the steering stops. Or the steering stop is
    already worn, in this case, please repalce it. Some steering stop has
    plastic covering,

    I just encountered this problem when I steered full to the left or right
    some metal to metal noise is coming from the front wheels.

    Hope this will help.

    jansen
     
    gansen, Apr 1, 2005
    #2
  3. cox news

    cox news Guest

    I'll check those tonight, thanks. This noise doesnt happen at full steering
    lock though, was yours the same way?

    jeff
     
    cox news, Apr 1, 2005
    #3
  4. The ball joints may be worn to fit the lower ride. You could try
    rotating them to see if the sound goes away or if happens in a different
    location.
     
    Kevin McMurtrie, Apr 2, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.