valve cover gasket failure.

Discussion in 'General Motoring' started by the_lower_class_brat, Jan 17, 2007.

  1. Well my accord has reached the 350 000 km, and the valve cover gasket
    has failed, I went to Napa and Canadian tire. Napa was charging 57
    dollars for a rubber gasket and Canadian tire was charging 52. I didn't
    udnerstand, all it was was a piece of silicone. I figured Id try my one
    last local place my mother told me of. and woila! 14.75 for the gasket
    with the spark plug seals. Poor baby, I felt so bad driving her around
    leaking oil, not very much but still. Anyways back to the subject, the
    gasket is manufactured by a company called Beck/Arnley. Anyone had any
    experience with their gaskets?
     
    the_lower_class_brat, Jan 17, 2007
    #1
  2. the_lower_class_brat

    motsco_ Guest

    =================================

    Voila! Now tell us where you got it so cheap . . It's all about sharing.

    'Curly'
     
    motsco_, Jan 18, 2007
    #2
  3. LS Auto in Dorion, Quebec, Canada, Im assuming your not from around
    there right? Tomorrow Im going back to napa to give the manager a
    whoopin'.
     
    the_lower_class_brat, Jan 18, 2007
    #3
  4. the_lower_class_brat

    motsco_ Guest

    =================================

    No, but I'm in Canada and I've got three Hondas on my driveway, so
    saving a bundle is always a good idea.

    'Curly'
     
    motsco_, Jan 18, 2007
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.