Valve Cover Torque

Discussion in 'General Motoring' started by Redwood, Oct 25, 2003.

  1. Redwood

    Redwood Guest

    The Haynes Manual says 84 ft/lbs for the valve cover bolts. I need the spec
    for the four nuts holding down the cover.

    Thanks
     
    Redwood, Oct 25, 2003
    #1
  2. Redwood

    Stephen Bigelow Guest

    10N-m, or 7.2 ft.lb
     
    Stephen Bigelow, Oct 25, 2003
    #2
  3. Redwood

    'Curly Q. Links' Guest

    -----------

    On our '95 Odyssey (you didn't mention what kind of vehicle you've got)
    you tighten the nuts until they stop, as I recall, because there's
    shoulders below the threads. It all fits so precisely there's no
    torqueing or re-torqueing involved.

    'Curly'
    --------------
     
    'Curly Q. Links', Oct 25, 2003
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Valve cover bolt busted off. Need advice

  2. Valve cover stud replacements

  3. valve cover gasket failure.

  4. 93 accord leaky valve cover gasket question

  5. Valve Cover Gasket

  6. 1995 Accord V6 valve cover seal change

  7. Honda Accord CYLINDER HEAD COVER torque settings

Loading...