vibration at traffic light

Discussion in 'General Motoring' started by mike113, Oct 21, 2004.

  1. mike113

    mike113 Guest

    Hi, i have a 99 honda crv which had an accident a year ago and t he front
    bump and hood was damaged. And now when i reach a tracffic light or stop
    the car vibrates. What is the causes from this, its pissing me off. But
    whenever u drive and t he car is in motion the vibration goes away. can
    anyone suggest anything. Should i take it back to my honda dealership
    where i had the repairs done.
     
    mike113, Oct 21, 2004
    #1
  2. mike113

    motsco_ _ Guest

    ========================

    If it's more than 30,000 miles since your last valve adjustment, have
    that done too. Your owner's manual is incorrect about the service
    interval. Rough idle / stalling during warm-up are the first symptoms,
    before the check engine light comes on to say you've burnt a valve.

    Could also be a damaged motor mount, but don't ignore the valves.

    'Curly'
     
    motsco_ _, Oct 21, 2004
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 96 accord starting and vibration problems - help me out PLZ :)

  2. 87 Prelude runs too hot in heavy traffic

  3. Need help! got high idle speed when i stuck in traffic!

  4. 96 Accord Running Hot in stop and go traffic.

  5. If you think your area traffic is bad...

  6. 1993 10th Anniversary Accord - Stalls at traffic lights, etc

  7. 87 prelude runs hot in heavy traffic

  8. Brake Pedal Sinking at the Traffic Lights

Loading...