wheel bearings

Discussion in 'General Motoring' started by mideb, Jan 13, 2005.

  1. mideb

    mideb Guest

    can any one tell me how 2 change front wheel bearins on a 1988 honda
    civic,and is it hard also i am looking 4 a repair manual and a owners
    man.
     
    mideb, Jan 13, 2005
    #1
  2. mideb

    Strike Guest

    Try here:
    http://www.honda.co.uk/owner/workshopmanuals.html
     
    Strike, Jan 13, 2005
    #2
  3. mideb

    Joseph Wind Guest

    I can't remember if the front hubs are the same as the rear, but in order to
    replace the bearings, you need to use a hydraulic press to remove the
    bearings. It's almost easier to replace the whole hub assembly (hub and
    bearings), than swap out the bearings.

    Here are the part numbers you'll need.
    (Auto Parts Warehouse no., Not Honda Part numbers)
    Hub assembly: K7001-61118
    Wheel Bearing: K8000-20395

    Do a search on these part numbers for the best prices, it's been two years
    when I had to replace these and the website I used is no longer around.
    Also make sure they are for the front. Honda recommends you replace the
    axle nut as well.

    If you have any questions, just ask.

    Good Luck!
    JW
     
    Joseph Wind, Jan 13, 2005
    #3
  4. mideb

    twfsa Guest

    Why do you think you need to replace the wheel bearings?

    Tom
     
    twfsa, Jan 14, 2005
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. LONG __ What, CRV rear wheel bearings never fail ? ? (AWD)

  2. Prelude wheel bearings

  3. 03 Accord rear wheel bearings

  4. Rear wheel bearings

  5. 99 Accord Rear Wheel Bearings

  6. front wheel bearings.

  7. 7 wheel bearings on 96 accord!!

  8. When Does Alternator Bearings and A/C Bearings Go Bad??

Loading...