Where is fill level bolt on manual 98 Civic?

Discussion in 'Civic' started by Al, May 17, 2005.

  1. Al

    Al Guest

    Where is the transmission fill level bolt on a
    98 Civic manual? A picture is worth several
    million words.
     
    Al, May 17, 2005
    #1
  2. Al

    David Guest

    It is difficult to find for two reasons. First, its up and behind the
    drive shaft. Second, it's behind the inside lower control linkage
    bushing mounting. If you've been able to find the drain hole; round
    bold with 3/8" square drive hole, you can find the fill hole. It's a
    19mm hex bolt diagonally across the axis of the drive shaft from the
    drain bolt.
    If your engine is clean and you have good light, you can see it from the
    top, but it's MUCH easier to get under and look for it from just behind
    the drive shaft centerline. My shop manual doesn't have a very good
    picture either. Let me know if you still have trouble.

    David
     
    David, May 3, 2006
    #2
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. 03 Civic Si fill up issue.

  2. how to correctly check oil level civic 2004 CTDI diesel

  3. 89 Honda Civic Fuel Smell after fill up

  4. Service manual for 2005 Accord (where to buy?)

  5. 94 Civic Oil Level Check (overfill problems)

  6. pedants corner: owners manual on honda oil level checking procedure

  7. Sound Level in 2003 Civic LX

  8. 92 Civic DX starting problem at fill-up...

Loading...