Wierd sort of pulsation in steering wheel 1990 Accord

Discussion in 'Accord' started by road apple, Sep 28, 2009.

  1. road apple

    road apple Guest

    When moving rather slowly turning the steering wheel slowly either
    right or left causes a pulsation in the steering wheel. It is most
    noticeable when I back out of the driveway and turn either left or
    right to head down the street. At first I thought it was a bent wheel
    but at higher speeds there is no vibration, nothing. I had new front
    tires installed and balanced as well as complete alignment about 20k
    miles ago at about 90k miles. If something is bent or out of balance
    should it not get worse at higher speeds? Both CV joints were changed
    at about 80k miles and there is no klicking sound when turning. Could
    the power steering pump be pulsating at lower rpms? Could the power
    steering actuator be binding up causing it to move in small jumps? I
    don't want to change thousands of $ of parts before I luck into the
    answer.
    Thanks Bob
     
    road apple, Sep 28, 2009
    #1
  2. road apple

    road apple Guest

    further to my first post at 20 mph or slower in a straight line you get
    the same pulsation. Maybe I had better go back to Americas Tire and
    have the front wheels checked.
     
    road apple, Sep 29, 2009
    #2
  3. road apple

    uncle K Guest

    A bent wheel might be more obvious at low speeds. This sounds like it could
    be a broken radial belt in a tire. Check the walls for lumps before you
    drive to the tire store. Good luck.
     
    uncle K, Sep 29, 2009
    #3
  4. road apple

    road apple Guest

    Thanks for the idea. Actually, America's Tire will check all of that
    for free. The only charge would be for a new tire. It might even have
    some waranty left.
     
    road apple, Sep 29, 2009
    #4
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.