Windshield wiper fluid not coming out

Discussion in 'General Motoring' started by adf, Feb 14, 2006.

  1. adf

    adf Guest

    Car: 1991 Honda Accord Wagon

    Problem: When I try to get the winshield wiper fluid nothing comes out.
    Howeve I can hear the mother come on. The read one works well. I also
    noticed that when I try to fill the wiper fluids just before it fills up it
    starts leaking and starts pouring on the ground.

    Can anyone tell me what is the problem and how I can remedy this.

    Thanks in advance.

    Dave
     
    adf, Feb 14, 2006
    #1
  2. adf

    Jim Yanik Guest

    You could have clogged or split tubing or a nozzle clog;use a fine needle
    to clear the nozzle. Pop Mechanics a few issues ago had an article about
    servicing washers.They also suggested backflushing the tubing from the
    nozzle end.
     
    Jim Yanik, Feb 14, 2006
    #2
  3. adf

    N.E.Ohio Bob Guest

    The fill tube is pulled loose from the reservoir, causing the leak near
    the top. May have to move the cruse control unit to see how to push it
    back together.
    Pull the tube off the nozzle under the hood. If juice comes out there,
    get a fine needle or pin and clean and re-aim the nozzles. bob
     
    N.E.Ohio Bob, Feb 15, 2006
    #3
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.